How to Make Good Sample with CNC Router
It is easy to make good samples with right steps:
1, To choose the tools according to the properties of the processing
material. It will destroy the cutting samples when the tools is not
suitable. For example, when the processing material is very hard and
stiffness, and the cutting requires to be deep. The engineer advice
to cut the material in several steps. Otherwise the tools will break
in one time deep cutting.
2. The most troublesome thing is that the tools broke during the
operation. It will delay the work if the operator do not find the
trouble and change the tools in time. So it is important to prevent
the tools from broke. First it need to know the service time of the
tools you choose,. And to observe the appearance of the tools wear
and tear. And the operator need to change a new tool by the time
the tools become to be black.
3. The next step is to make a good working path with the software.
The Artcam, Type3, Ucancan, Vetric Pro, UG, Visual Mill, Power
Mill, Master Cam, Alpha cam and so on. The COMEID.COM friend
can find the training course share on the blog.
4. It needs to pay attention to the tool feeding direction. To be
clockwise or counterclockwise, the operator’s choice will lead to
a best result.
Previous article:http://www.comeid.com/eshownews.asp?/107.html
Next article:
Keyword: CNC router
No comments:
Post a Comment