Laser Metal Cutting Machine -Why No Action After Booting

Laser Metal Cutting Machine -Why No Action After Booting


1.To check the Barrier on the machine. It can use the hand push cart and beams to check if it is Smooth. Laser cutting machine

2. To check he motor shaft is broken, and Synchronization round loose or not.

3.To check Whether the switch button is normal or nor,You can observable switch button on the light-emitting tube is bright.

4. To check the board of the master socket has no electricity,The plug is not inserted.

5. To check the fuse blows in Socket of the machine

6. To check Machine input power cord is not connected,The input and output voltage are not normal.

7. To check the motherboard line connecting the drive or plug has poor contact.

8. To check .wire between drive and motor is disconnected.

9. To check Machine's setup parameter is incorrect.

10. To check Motherboard appears failure,You can check the display indicator lights on the motherboard.

11. To check the motherboard input voltage is not correct.

Key word: Laser cutting machine