Fire Metal Cutting Machine with Plasma Cutting Machine

Fire metal cutting machine with plasma cutting machine
They share the same CNC control system
the super large size working area and cutting from 1-45mm

Laser Welding Machine for Billboard Letter

Because of its high average power, soon after YAG laser occurs as a preferred spot and seam welding apparatus. The welding process is carried out by points/laser spots. Through the video you can see the YAG laser welding finished workpiece beautiful appearance, small welds, welding depth, high quality welding.
And this machine laser only work on metal, no effect on skin.
QQ:358097389
http://www.comeid.com/eShopMore.asp?id=104
Mobile:86-13553153115
Skype:rose.huang07
Email:rosehu2009@gmail.com

Video link:

Channel Letter Bending Machine for Billboard

Channel Letter Bending Machine is also called automatic CNC 

metal bending machine. It is a new advertising production equipment, 

which can be used for logos, signs, billboards, light boxes production,

 outdoor advertising and other advertising production.

Features:

1. Automatic feeding, automatic notch, automatic bending(Min bending 

   diameter is 15MM).

   Automatically cut any angle from 45° to 135°.

2. Available material: iron sheet, aluminum, stainless steel. Width ranges: 30~128mm.

   Material thickness: iron sheet, aluminum 0.4~1.2mm, stainless steel ≦0.8mm

3. Supported graphic format: vector file such as DXF,AI

4. High speed: It only takes 44 seconds to finish one 33cm letter like

  "s"with stepper motor.

5. Machine Dimension: 2350*850*1780mm

6. Special specification and requirements is acceptable.

Available Materials:

Aluminum strip, aluminum stainless steel strip bending, iron bending, galvanized

 steel bending ect.

The Safety Working Requirement of Plasma Cutter

The plasma system is very effective in cutting any 
conductive metal, and it is the the most popular 
method in the world for cutting mild steel.
For course cutting machine, CNC flame cutting low efficiency 
of these materials compared to plasma cutting stainless 
steel and aluminum is one of its main advantages.

The work environment for plasma cutter is strict.
1.The workplace is not more than 1000 meters above sea level;
2.Ambient temperature between -10 degrees and 40 degrees;
 transport and storage temperature between -25 degrees and 55
 degrees.
3.Supply voltage waveform should be the actual sine wave frequency 
fluctuation does not exceed its rating ± 2%;
4.Fluctuations in the supply voltage does not exceed its rated 
value ± 10%;
5.Three-phase supply voltage unbalance rate of not more than 5%;
6.Air can not contain acid, alkali and other corrosive gases and 
toxic and harmful gases or dust (except cutting gas and dust)
7.Not in the near shoreline areas work salt in the air;
8.Speed of wind in the workplace less than 2m / s;
9.Not suitable for use in the rain.

3D Scanning and CNC Wood Engraving Machine Hot Sale

It takes about 25 minutes for scanning the Hindo God and

changed it into G code through ARTCAM software.

And we use the wood carving CNC Router and rotary device to engraving the elephant.
Only 3 hours finish the work which it looks like the original one and we shows at the end of the video.

There are two kinds of blade tools to carving the figure.
First , it is rough carving by 6MM diameter Cutter with
 straight grooves. the nose is 0.3mm

Second, it use the 30degree, 3.175mm diameter cutter for precision carving.
the nose is also 0.3mm

Any question please contact rosehu2009@gmail.com
www.comeid.com

My skype is : rose.huang07

Used Machine Sell- UK Customer Buy it in 2011

Working Area: 1500*4500mm
Spindle Motor: 6 pieces
Used for carving wood, engraving shaft and guitars.

One of my UK friend want to sell this machine which work still perfect.
Is there any one interested in used machine in cheap price?
Please ask me for his information if you want this machine.

CO2 Laser Metal Cutting Machine for Sale

We recommended you using COMEID CO2 laser cutting machine to cut 

carbon steel plate less than 20mm and stainless steel plate and the 

acrylic, wood and other non-metallic materials within 10mm.
The laser cutting with no touch the metal sheet.

Features:

 It has no cutting tools wear and tear.

CNC control,the cutting is speedy 

Design the pattern by software, it can realize automatic nesting, improve 

the material utilization

Low production costs and good economic returns.

Cutting line is narrow, within 0.02mm, no pollution

There are some points make the cutting to be not smooth, and do not cut 

through.

The problems is as follows:

Laser head nozzle selection does not match the sheet thickness; 

Laser Cutting speed too fast, the operation control needs to reduce the line 

speed;

Cutting nozzle is too large to cause the laser focal position

Sensor error, the need to re-detect the nozzle sensor data, especially when 

cutting aluminum

Add caption